Product Description:
AT6011 Spectrum Analyzer is a low
cost, high performance digital synthesized RF measurement instrument
with Tracking Generator and frequency up to 1GHz. It uses VCO phase
locked technique. It is rugged and easy to control operating panel. It's
the most stable Spectrum Analyzer you can find with good noise floor
performance.
AT6000 Series spectrum analyzer
have exceed 1GHZ frequency (0.15 ~1050MHZ)50MHZ step frequency and fine
adjust to the center frequency, compose the convenient frequency-domain
test.AT6011 have the tracking signal generator.
Features:
•Frequency Range: 150KHz to 500MHz
•4½ Digit Display: Centre &
Marker Frequency,
•0.1MHz Resolution
•Amplitude Range: -100dBm to +13dBm
•Filters: 20KHz, 250KHz &
Video Filter.
•Output Power: +1dBm to -50dBm (50
ohms)
•Built-in Tracking Generator:
0.15MHz to 1050MHz (Only for Model AT5011+)
Models:
•AT6010 1GHz Standard Model
•AT6011 1GHz with Tracking
Generator
Technical Specifications:
|
Frequency range: |
0.15 to 1050MHz |
|
CF adjust range: |
0~1050MHz |
|
Resolution of frequency display: |
10kHz |
|
RBW: |
400kHz and 20kHz |
|
Video filter bandwidth: |
4kHz |
|
Average noise level: - |
90dBm (20kHz Bandwidth) |
|
Amplitude range |
-100dBm to +10dBm |
|
Sweep rate |
40Hz |
|
Reference level |
-30dBm to +10dBm |
|
Frequency generator |
TCXO DDS |
|
Input attenuator accuracy |
+/-1dB/10dB |
|
Signal input connector |
N type |
|
Stability |
+/-5ppm/year |
|
Aging |
+/-1ppm/year |
|
Accuracy |
+/-10kHz |
|
Display |
CRT 8x10 Div |
|
Third order intermod |
-90dBc (two signals > 3MHz apart) |
|
Scan width |
100kHz/div~100MHz/div, 1-2-5 steps and 0 step |
|
Log scale fidelity |
+/-2dB (CF: 500MHz 10dBm attn zero scan |
|
RBW |
400kHz ) 500MHz |
AT6011+ Tracking Generator
Specifications:
•Output: N connector
•Output Impedance: 50ou
•Frequency range: 0.15MHz~1050MHz
•Output level range:-50dBm~+0dBm
(in 10dB steps and var)
•Frequency response: ±2dB
•Output attenuator: 0~40dBm
(4*10dB)